We use a light weight aluminum plastic composite material, aka ACM or ACP. The face and back are thin aluminum, and the core is recycled plastic. It's very popular for making signs, and is made for any weather, from arctic cold to desert heat or wet conditions. It won't rust or rot, and if you need a custom color it can be spray painted. The screws used to fasten are steel, with painted heads. If you would like more corrosion resistant screws, request our stainless screw option with a note on your order, or by messaging me.

SCREWS + SPACERS FASTENING: Comes pre-drilled for screws and includes 3/8″ spacers to make your number stand out from the wall. 1.5″ screws are also included

PEEL + STICK FASTENING: No holes on the face and outdoor rated adhesive tape already applied. *NOT FOR USE ON STUCCO OR ROUGH SURFACES.

This means there will be no holes on the face of your number and an outdoor rated adhesive tape already applied to the back. You will need to clean your surface, peel the backing off of the adhesive and stick into place. ADHESIVE OPTION NOT FOR USE ON STUCCO OR ROUGH SURFACES. Instructions for application are included with your order. These must be installed in warm weather above 50f or 10C. However, once installed it withstands extreme cold and heat, as well as ice rain snow etc.

Read this for how to use the templates for peel + stick installation.

1. Print free templates, and tape them together using the guidelines. Adjust spacing how you like them.Tape them to the wall. Info on assembling templates here

Don't have templates? Space out the numbers on the wall, using masking tape to temporarily hold them in place and using a level to make sure they are straight. Step back to check, and adjust spacing as necessary.

2. When you are satisfied with the placement, hold the number to the template. Using the number as a guide, drill the screw holes with a small bit (1/8 inch or smaller)

If you are using wall anchors for brick or stone, remove the numbers and enlarge the holes with appropriate size drill (3/16) and insert wall anchors by tapping with a small hammer. Here's our handy bit and anchor kit, or buy separately at your local store

3. Fasten with screws and stand offs, using the holes you
just drilled.
4. Remove template and you are done!

We recommend predrilling the holes for the screws into the brick and using a wall anchor – available here or at your local hardware store.

Find blog post and photos here.

The most popular LETTERCUT house number is the THIN MODERN 8 inch black number that is fastened with screws and spacers. No surprise - they look awesome on every house.

White and black house numbers are a modern matte finish. The matte finish eliminates glare and is easier to read.

Black, Brushed Silver and White are the standard colors we carry. All colors have a black core which is visible from the side and gives a depth to the lighter colors. Includes coordinating color of screws.

Our most popular sizes are

The versatile 5 inch tall.
The popular 8 inch tall.
The easily seen 12 inch tall.

Custom sizes are available ranging from 3 inch to 30 inch or larger. To get a quote, email Brian@mylettercut.com with the size,style,color, and postal code for a quote.

Free shipping to Canada and USA for all orders over $30.
You can see shipping charges at checkout. Includes Express and International orders.

Yes, we accept returns on standard items that are unused and in new condition*

Contact us within 21 days of delivery to return or exchange your item. You are responsible for return shipping costs.

*Digits over 16 inches in size are non-refundable

Contact Brian here: Brian@MyLetterCut.com

We do our best to accomodate you and help make a product you love. However, we do reserve the right to decline custom orders due to time and possibility constraints. 

Read this blog post showing some custom orders we have done.

You can shop right here on our website or you shop from our LETTERCUT Etsy shop if you prefer.

Yes we do!! Contact Jane here: Brian@MyLetterCut.com

The numbers and letters can vary slightly in height and width, even if you order all the same height. This is because font designers usually make digits with curves on top or bottom to be taller. It helps them appear more uniform visually and is not a defect. However sometimes this can make them appear larger or smaller than the digit beside it. If you have questions or would like to see a preview of your digits before ordering, please email Brian@MyLetterCut.com. You can also download and print free templates here to see them and help with visualizing them in your space.